Fast-Joint Flange
Titanium Gr1 Gr2 2" to 5" V Band Clamp With Male & Female Flanges
Technical Details
2006
Founded in Baoji Valley
100%
EN 10204 3.1 Traceable
0.02mm
CNC Thread Tolerance
≤ 8h
Engineering Response
Precision Manufacturing
High-Integrity Titanium Mill Products & Components
Manufactured from vacuum-melted Grade 2, Grade 5, and Grade 7 titanium stock under rigorous ISO 9001 certified protocols for industrial and high-stress processing.
Industrial Engineering Whitepaper: Titanium Threaded Flanges (Screwed Flanges)
In high-corrosion industrial processing and fluid handling systems, the threaded flange (also recognized as a screwed flange) plays an indispensable role. Unlike slip-on or weld-neck flanges that demand extensive hot-work permits and controlled on-site shielding gases, titanium threaded flanges allow leak-tight mechanical assembly in explosion-hazardous zones or tight maintenance corridors. By cutting precision female threads conforming to ASME B1.20.1 NPT (National Pipe Taper) or ISO 7-1 Rc (BSPT) into vacuum-forged titanium blanks, our engineering works achieve mechanical seals capable of holding pressure up to Class 300 and Class 600 without compromising metallurgical grain orientation.
Jovzi Titanium manufactures screwed flanges strictly compliant with ASME B16.5, DIN EN 1092-1 Type 13, and ASTM B381 forging standards. The primary metallurgical advantage of using Grade 2 (UNS R50400) or Grade 7 (UNS R52400 with 0.15% Palladium) lies in the instantaneous development of a tenacious, chemically passive titanium dioxide (TiO₂) film. In environments with aggressive chloride ions, wet chlorine gas, hypochlorite bleaching liquors, or marine saline mists, this self-healing passive boundary prevents localized pitting, crevice deterioration, and stress corrosion cracking that predictably destroy AISI 316L, 904L, and duplex 2205 stainless steels.
For high-pressure hydraulic actuators or localized structural assemblies in specialized equipment, Jovzi utilizes Grade 5 (Ti-6Al-4V, UNS R56400). Delivering a yield strength exceeding 828 MPa alongside an exceptionally high strength-to-weight ratio (density 4.43 g/cm³), Grade 5 threaded flanges resist intense mechanical torque, pulse vibrations, and cycling loads while maintaining precise concentricity across wide operational thermal windows (-196°C to +400°C).
| Nominal Size (NPS / DN) | Pressure Class | Material Specification | Standard Thread Forms | Flange Facing Type | Quality Documentation |
|---|---|---|---|---|---|
| 1/2" to 4" (DN15 - DN100) | Class 150 / PN10 - PN16 | ASTM B381 Gr. F-2 / F-7 | ASME B1.20.1 NPT, EN 10226 Rp/Rc | Raised Face (RF), Flat Face (FF) | EN 10204 3.1 MTC / BaoTi Tested |
| 1/2" to 2" (DN15 - DN50) | Class 300 / PN25 - PN40 | ASTM B381 Gr. F-2 / F-5 | Taper Pipe NPT, ISO 7-1 Rc | Raised Face (RF 0.06"), RTJ Ring | 100% Dimensional & Thread Go/No-Go |
| 1/4" to 3" (DN8 - DN80) | Class 600 / PN63 - PN100 | ASTM B381 Gr. F-5 (Ti-6Al-4V) | High Pressure NPT, SAE UN/UNF | Ring Type Joint (RTJ), Smooth RF | Ultrasonic Inspection + EN 10204 3.1 |
| Custom Bore / Oversized | To Specification (PN6 - PN160) | Gr. 1, 2, 5, 7, 9, 12, Nitinol | Metric DIN 13, Parallel BSPP (G) | O-ring Groove, Tongue & Groove | Third-Party Witness (TÜV / Lloyd's) |
Regional Infrastructure Integration
Localized Applications Across the Utrecht Hub
Serving the logistical heart of the Netherlands: Delivering specialized titanium hardware to dynamic research clusters, chemical corridors, and regional water networks.
Utrecht Science Park & Biopharma
Utrecht hosts one of Europe’s leading biotechnology, bioprinting, and life sciences ecosystems. High-purity bioreactors, medical fluid processing columns, and pharmaceutical chromatography loops in Utrecht Science Park demand unyielding bio-inertness. Titanium threaded flanges eliminate nickel-ion elution and iron contamination, ensuring pristine fluid integrity during the production of active pharmaceutical ingredients (APIs).
Chemical Refining & Industrial Corridors
Positioned along the Amsterdam-Rhine Canal and interconnecting the Rotterdam-Antwerp industrial triangle with central Dutch processing nodes, Utrecht’s specialized specialty chemical facilities frequently manage acidic solutions and volatile organic chemicals. Grade 7 (Ti-Pd) and Grade 12 threaded flanges prevent crevice cracking in heat-exchanger tie-ins and dosing lines handling wet chlorine and aggressive nitrates.
Inland Marine & Water Treatment
Utrecht is a vital junction for European inland waterways, serving high-efficiency river vessels, barge transport, and regional water treatment centers like the Hoogheemraadschap de Stichtse Rijnlanden. Titanium threaded flanges provide total lifecycle immunity against brackish water corrosion, ballast piping biofouling, and cavitation wear, radically lowering maintenance downtime compared to conventional bronze or stainless assemblies.
Engineering Trends Shaping Titanium Adoption in the Utrecht Region
Decarbonization, Electrolysis & Green Hydrogen: The Dutch National Hydrogen Programme and regional clean tech initiatives surrounding Utrecht are accelerating investments in polymer electrolyte membrane (PEM) electrolyzers and next-generation hydrogen fuel cells. Titanium serves as an exceptional structural and piping substrate in these systems due to its robust corrosion resistance at the anode where oxygen evolution occurs. Titanium threaded flanges provide clean, mechanically secure closures for peripheral pilot skid systems, preventing fluid embrittlement and resisting aggressive acidic catalytic fluids without degrading precious metal coatings.
Circularity and True Lifecycle Cost Management (LCC): Dutch procurement engineering teams are increasingly migrating away from initial CapEx considerations toward rigorous 30-year Life Cycle Costing (LCC). While austenitic stainless steel piping circuits demand frequent passivation, surface re-pickling, and periodic flange gasket surface remachining every three to five years in aggressive media, titanium screwed joints exhibit zero dimensional wall loss over multi-decade service life. Jovzi supports circular industrial directives across Utrecht by providing 100% recyclable, REACH/RoHS-compliant titanium flanges fabricated exclusively with verifiable material footprints.
Modular High-Precision Plant Architecture: Compact, skid-mounted chemical modularization has emerged as the prevailing standard across Dutch R&D pilot facilities. Engineers favor ASME B16.5 titanium threaded flanges because they eliminate the broad heat-affected zone (HAZ) and weld-induced microstructural warping caused by on-site manual welding torches. Prefabricated, precision-threaded Jovzi Grade 2 flanges screw directly into high-accuracy manifolds, speeding up installation schedules and slashing validation cycles.
Enterprise Credentials
Why Engineers in Utrecht Partner with Jovzi Titanium
Direct from China's Titanium Valley (Baoji), our vertically integrated manufacturing facility provides complete metallurgical integrity, strict technical governance, and seamless international fulfillment.
Baoji Titanium Valley Origin
Founded in 2006 in Baoji, Shaanxi—producing over 60% of China's titanium mill output. We utilize direct sponge-to-ingot melt stocks, assuring reliable material continuity and verified metallurgical pedigree.
Certified In-House Engineering
Our workshop team is powered by 4 senior and 5 intermediate metallurgical and tooling engineers, controlling close-tolerance CNC multi-axis turning, forging, thread rolling, and precision testing.
EN 10204 3.1 & BaoTi Test Reports
Every shipment is covered by verifiable Mill Test Certificates specifying heat numbers, chemistry, and tensile parameters. Third-party testing by the national BaoTi Test Center is available upon request.
Extensive Export Logistical Reach
With an 81–90% global export quota across Western Europe and North America, we support flexible Incoterms (FOB, CIF, CFR, DDP, DAP) with custom seaworthy export wooden boxing and protective sealing.
Procurement Guidance
Frequently Asked Questions by Dutch Engineers & Buyers
Critical metallurgical, compliance, and logistical clarifications for engineering teams in Utrecht and the wider Benelux region.
What are the key thread specifications provided for installations in the Netherlands? +
We manufacture titanium threaded flanges with dual capability: ASME B1.20.1 NPT threads (60° thread angle with 1:16 taper) commonly required for American-designed equipment and international skid skids, alongside ISO 7-1 (BSPT - Rc tapered internal thread) and ISO 228-1 (BSPP - G parallel internal thread) widely standard across Dutch and European processing installations. All threads are 100% verified using hardened master plug gauges before packing.
How does Jovzi ensure compliance with European Pressure Equipment Directive (PED 2014/68/EU)? +
All pressure-retaining components, including ASTM B381 forgings and ASTM B363 fittings, are supplied with an authentic EN 10204 3.1 inspection certificate confirming chemical composition (C, Fe, N, O, H, Ti) and mechanical metrics (tensile, yield, elongation). Upon request, Jovzi collaborates with notified bodies (such as TÜV Rheinland, DNV, or Lloyd's Register) to perform material appraisals and third-party witness testing aligned with PED 2014/68/EU Annex I requirements.
Why choose a threaded titanium flange over a weld neck or slip-on flange? +
Titanium demands an ultra-pure argon shielding environment (down to < 20 ppm O₂) during welding to avoid atmospheric oxygen/nitrogen pick-up that causes embrittlement. In retrofitting operations, brownfield chemical plants, or explosion-risk areas common in Dutch industrial zones, hot work permits are complex and costly. Threaded titanium flanges permit secure mechanical jointing without open flames, special welding chambers, or post-weld pickling treatments.
What anti-galling and thread sealing measures should be used with titanium threaded flanges? +
Titanium has a natural tendency to gall when mating threads contact under high pressure. We recommend applying specialized nickel-free or fluoropolymer PTFE tape, anaerobic liquid thread sealants formulated for reactive metals, or silver-based anti-seize lubricants during assembly. Additionally, our factory can deliver flanges with pre-applied micro-arc oxidation (MAO) or anodized surface finishes to radically increase surface lubricity and galling resistance.
What are the lead times and shipping options for deliveries to Utrecht? +
Standard sizes (NPS 1/2" to 3" in Gr.2 Class 150) are frequently fulfilled from forging blank stocks within 7 to 15 working days. For urgent project demands, consolidated air express shipments (via DHL, FedEx, or air cargo through Amsterdam Schiphol Airport - AMS, located only 45 km from Utrecht) deliver in 4 to 6 business days. Full container loads or consolidated sea cargo are shipped directly into the Port of Rotterdam with complete customs documentation (DDP / CIF terms).
Request Technical Flange Catalogs & Custom Drawings
Connect immediately with our senior metallurgical engineering department in Baoji. We evaluate ASME B16.5 dimensions, custom DIN drawings, pressure ratings, and provide comprehensive quotation packages within 8 hours.
Get Catalog