Direct supply from Baoji manufacturing base. Fully compliant with ASTM B381, ASME B16.5, ASTM B348, and international pressure vessel standards.
In modern industrial piping and fluid handling systems, the Slip On (SO) flange represents an optimal balance between structural safety, alignment tolerance, and assembly economics. For industrial contractors, hotel utility planners, and desalination engineers across Cambodia—specifically around Siem Reap and the Tonle Sap hydrological corridor—procuring non-ferrous flange components that combine ease of fit-up with metallurgical resilience is critical.
Jovzi Titanium Industry Co., Ltd. supplies forged and finish-machined Grade 2 and Grade 5 Titanium Slip On Flanges manufactured in complete accordance with ASME B16.5, DIN EN 1092-1, and JIS B2220 standards. Slip-on flanges slide smoothly over the exterior diameter of pipe or fitting before being double-fillet welded—both on the inside hub and external shoulder. This configuration significantly lowers field alignment difficulty and minimizes circumferential angular deviations, making them indispensable for complex utility retrofits and piping installations throughout the Siem Reap province.
Siem Reap hosts elite five-star hotel complexes requiring closed-loop geothermal heat exchangers, chillers, and chemical descaling manifolds. Jovzi Gr2 titanium slip-on flanges withstand raw chlorinated water and aggressive biocide flushes without microbiological pitting corrosion.
Seasonal hydrological shifts around the Tonle Sap basin create fluctuating high-mineral silt and brackish inflow conditions. Reverse osmosis (RO) high-pressure skid headers equipped with Jovzi Grade 2 slip-on flanges completely eliminate crevice corrosion under chloride exposure.
Regional cassava refining, beverage bottling, and agricultural drying infrastructure demand sanitary fluid handling. Jovzi titanium SO flanges provide an ultra-clean, chemically inert fluid boundary preventing iron or nickel leaching into certified food products.
| Property Parameter | Gr2 Titanium (UNS R50400) | Gr5 Titanium (Ti-6Al-4V) | Gr7 Titanium (Ti-0.15Pd) | AISI 316L Stainless Steel |
|---|---|---|---|---|
| Density (g/cm³) | 4.51 | 4.43 | 4.51 | 7.98 |
| Yield Strength 0.2% (MPa) | ≥ 275 | ≥ 828 | ≥ 275 | ≥ 220 |
| Tensile Strength (MPa) | ≥ 345 | ≥ 895 | ≥ 345 | ≥ 520 |
| Chloride Pitting Resistance | Immune up to 80°C | Superior | Immune >250°C | Vulnerable to SCC >60°C |
| Field Weldability | Excellent (GTAW with trailing gas) | Requires strict preheat/PWHT | Excellent (Argon trailing) | Standard GTAW/SMAW |
| Typical Siem Reap Application | HVAC, RO Skids, Chilled Water | High-pressure hydraulic flanges | Acid-dosed wastewater recovery | Legacy baseline (frequent failure) |
The construction and infrastructure landscape of Siem Reap is shifting towards green, durable infrastructure. Supported by the commissioning of the Siem Reap Angkor International Airport (SAI) and expanded Special Economic Zones (SEZs) along National Road 6, project developers are departing from cheap, short-lived carbon and duplex steel pipes in favor of advanced reactive metals.
Mechanical consultants in Siem Reap are transitioning their procurement guidelines from initial CapEx to operational 30-year Life Cycle Cost models. In tropical conditions, replacing corroded 316L flanges every 36 months generates prohibitive downtime expenses compared to install-and-forget titanium solutions.
Resorts surrounding Angkor Archaeological Park face stringent environmental discharge audits. Jovzi titanium slip on flanges avoid cathodic sacrificial zinc coatings, eliminating hazardous zinc runoff into local aquifers and sensitive historical drainage canals.
Procurement teams in Phnom Penh and Siem Reap increasingly bypass regional trading hubs in Singapore or Bangkok. Direct consolidation from our Baoji forging facility provides verified EN 10204 3.1 certification and lowers unit acquisition costs by 22% to 35%.
Answers to practical engineering, logistical, and inspection questions raised by Southeast Asian buyers.
Jovzi Titanium Industry Co., Ltd. (established in 2006) operates in Baoji, Shaanxi—known globally as China's Titanium Valley. We integrate sponge melting, open-die forging, ring rolling, CNC turning, and mechanical testing under a unified ISO 9001:2015 quality control system.
Supply your schedule of piping components, engineering specs, or RFQ lists for review by our metallurgical engineering desk within 8 hours.